Description

200 GPD Floor-Standing Light Commercial RO System with 20” Pre-Filters
This light duty commercial reverse osmosis (RO) system can deliver up to 200 gallons per day. Ideal for light-use commercial and food service applications such as coffee shops, restaurants, school and hospital cafeterias, and catering operations. It features a corrosion resistant frame-mount that can be either mounted on the wall or used as a floor mount system.

The RO-200G is not recommended as a whole house system. This is because the pump on the RO-200G is not intended for constant use and the usage requirements needed for whole house residential water treatment. If you are looking for a whole house reverse osmosis system, please check out our RO-850X.

RO-200G Commercial RO System Features:

Quick connect fittings
Membrane housing, cartridges, fittings, and tubing are NSF certified
High quality 20 inch water filters provide extended filter life and high capacity. This 200 GPD reverse osmosis system includes a 1 micron sediment water filter (PPG20/01), and two 5 micron carbon block water filters (AMF-CBC20/5) that remove chlorine and more.
Two 100 GPD TFC reverse osmosis membranes
White powder coated aluminum frame that is corrosion resistant so it will not rust
Can be floor-standing or wall mounted
100% wet tested
Filter wrench included
Stages of the RO-200G 200 GPD Reverse Osmosis System
This 200 GPD reverse osmosis system delivers healthy, pure water that is free from chlorine, hardness, heavy metals, toxins, and many other water impurities. Here’s how the system works:

Stage 1 – 1 micron sediment filter (PPG20/01) – Replace every 6 months
Stage 2 – 5 micron coconut shell carbon block water filter (AMF-CBC20) removes sediment, chlorine, offensive taste and odors, rust, and particulates. A carbon block water filter provides more contaminant removal than a granular activated carbon filter (GAC filter) which means better tasting water too. Coconut shell carbon block technology is eco-friendly. Replace every 6 months.
Stage 3 – Thin-film composite membrane (RO100GPD) – Replace every 24 months
Stage 4 – Another cycle through a second thin-film composite membrane (RO100GPD membrane) – Replace every 24 months
Stage 5 – 5 micron carbon block water filter (AMF-CBC20) – Replace every 6 months
RO-200G Commercial RO System Specifications:
Dimensions: 7″ L x 17″ W x 32″ H
Feed water source: TDS levels up to 1,000 ppm
Operating temperature: 40° – 100° F
Operating pressure: 40 – 80 psi
Tubing: 1/4″ white
Recovery rate: 1:4 recovery waste
View RO-200G Spec Sheet

RO-200G Commercial RO Replacement Filters – replace these three water filters once every 6 months:
1 x PPG20/01 – 1 micron sediment filter, grooved
2 x AMF-CBC20/5 – 5 micron carbon block filter